BS 5467/EEMUA Pub. N°133 Armoured (LC-SWA) Flame retardant Removed
Description
Applications
These power and control cables are used for electricity supply in low voltage installation system. They are well adapted to underground use in industrial applications, in moist areas, where hydrocarbon and mechanical protections are needed and are protected against solvent penetration and corrosive attacks. The lead cover brings an enhanced resistance to aromatic hydrocarbons.
Description
These power and control cables are used for electricity supply in low voltage installation system. They are well adapted to underground use in industrial applications, in moist areas, where hydrocarbon and mechanical protections are needed and are protected against solvent penetration and corrosive attacks. The lead cover brings an enhanced resistance to aromatic hydrocarbons.
Standards
International : IEC 60332-1-2National : BS 5467; BS 6360; BS 7655; BS EN 10244-2 ; BS EN 12548 ; EEMUA Pub. N°133
Description
Design
Conductor: Stranded bare copper (class 2)
Insulation: XLPE (Cross-linked polyethylene)
Bedding (optional)
Inner sheath: PVC (Polyvinyl chloride)
Lead cover (lead sheath): alloy
Bedding : PVC (Polyvinyl chloride)
Armour: Galvanised steel wires (SWA) or aluminium wires (AWA) for single core cables
Outer sheath: PVC (Polyvinyl chloride), UV resistant. Colour: black.
Core identification
1 core: black
2 to 5 cores: according to HD 308 S2 and BS 7671
> 5 cores: printed numbers
> 5G cores: printed numbers + green/yellow core
Marking
NEXANS 279 year construction 0.6/1 kV n (G or x) S mm²
Other fire performances IEC 60332-3 Cat A or C on request.
Minimum bending radius:
1 core: 10 x outer diameter
Multicores: 8 x outer diameter
To be doubled during laying operations
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | Bare copper |
| Conductor flexibility | Stranded class 2 |
| Insulation | XLPE (Cross-linked Polyethylene) |
| Inner sheath | PVC |
| Lead Sheath | Yes |
| Armour type | Galvanized steel wires |
| Outer sheath | PVC |
| Sheath colour | Black |
| Electrical characteristics | |
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Mechanical characteristics | |
| Mechanical resistance to impacts | Good |
| Usage characteristics | |
| Flame retardant | IEC 60332-1-2 |
| Chemical resistance | Aliphatic and aromatic hydrocarbons resistant |
| Operating temperature, range | -20 .. 60°C |
| Max. conductor temperature in service | 90°C |
| Specific characteristics | |
| See all products | |
| |
Products and services
Docs and info
Related documents
Selling information
Current rating in Amperes according to NF C 15100 for ambiant temperature :
30 ° C (in open air)
20 ° C (underground)
