SIWO-KUL D30 1x16 1,1 kV YE
StandardsInternational : IEC 60092;IEC 60331;IEC 60332-1;IEC 60332-3;IEC 60754-1;IEC 60754-2;IEEE 383;LLOYDS Reg. 91/00126(E1);UIC 895;VERITAS N°09555/A0 BV ACE1/723 PC 2502H
National : BSS 6195-T5-C-D-E-F;DIN VDE 0472;NF F 16-101/BF1
SIWO-KUL® D30 cables are required when high flexibility and high temperature conditions are present; they are mainly used in medium-voltage motors and generators for connecting stator coils to the terminal box. They are also vital elements for wind converters, transformers, solar power inverters and other MV/LV cabinets. In drives, silicone decreases copper cross-section and gives flexibility for compactness.
SIWO-KUL® D30 1.1 kV cables are class 5 single core cables.
This product family is designed with dual silicon insulation particularly used when the cable is not submitted to severe mechanical constraints.
- Copper conductor tinned, flexible IEC 60228, class 5
- Silicone rubber insulation (color white)
- Silicone rubber insulation (color yellow)
The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.
The two different colored layers of silicone insulation make immediately possible to identify visually a damage.
Operating temperature for continuous service extends from –55°C up to 180°C.
This product family is also part of our Windlink® offer for Wind turbines.
These cables are UL (Underwriters Laboratories Inc.) approved for Appliance Wiring Material (AWM), following styles 3640, 3641, 3642 and 3643, CSA File No. 2193117.
SIWO-KUL® D30 cables are in compliance with EU directives on the limits of certain metals and waste as defined on ROHS (Restriction of Hazardous Substances) and WEE (Waste from Electrical and Electronic Equipment).
|Conductor material||Tinned copper|
|Conductor flexibility||Flexible class 5|
|Outer sheath||Silicon elastomer|
|Construction type||119 x 0.40|
|Nominal outer diameter||8.35mm|
|Precision of diameter||+/- 0.3 mm|
|Maximum peak voltage||0. .. 10.kV|
|Max. DC resistance of the conductor at 20°C||1.24Ohm/km|
|Dielectric constant relative value (indicative)||3.50|
|Loss factor tan d||< 10-2|
|Breakdown field strength (kV/mm)||> 20|
|Insulation resistance at 20°C||170000.0MOhm.km|
|Minimum Tensile Strength||8.0MPa|
|Elongation at break of insulation (%)||> 250|
|Permissible pulling forces||0.05kN/mm²|
|Minimum static operating bending radius||47.4mm|
|Operating temperature, range||-55 .. 180°C|
|Maximum operating temperature||180°C|
|Minimum operating temperature||-55°C|
|Fire resistant||IEC 60331|
|Flame retardant||IEC 60332-1|
|Fire retardant||IEC 60332-3-24|
|Gases corrosivity||IEC 60754-1, IEC 60754-2|
|Smoke density||IEC 61034|
|Packaging||Cut to length|
Docs and info
Our SIWO-KUL® D30 cables have been printed:
NEXANS SWITZERLAND SIWO-KUL® D30 + voltage in kV + section in mm² + Standards + Meter marks