iGigaSwitch 10xx E+ HW5 Series

Produits

iGigaSwitch 1002 E+ SFP-2VI HW5

Réf. Nexans 88306422

  • Conditionnement: Unité

iGigaSwitch 1004 E+ SFP-4VI HW5

Réf. Nexans 88306424

  • Conditionnement: Unité

iGigaSwitch 1008 E+ SFP-8VI HW5

Réf. Nexans 88306428

  • Conditionnement: Unité

Description

Description

LANactive Industry 10 port managed Full Gigabit Ethernet Switch

  • 10 ports in total, variable number of SFP ports (2, 4 or 8)
  • Up to 8 PoE+ ports with max. 240W power budget
  • Up to 6 PoE++ ports with max. 540W power budget
  • Built-in I/O module with 2 input and 2 output ports
  • Wide operating temperature range, -40 ... +85°C
  • Wide input power range, 18 ... 60V DC


Nexans managed Industrial Ethernet iGigaSwitch 10xx E+ HW5 series is part of the LANactive Industry product portfolio and designed for installing a robust and reliable networks in harsh environments. The LANactive Industry iGigaSwitch 10xx series is designed to provide a maximum of network availability, security and longest lifetime in harsh environments. The iGigaSwitch 10xx series provides great flexibility in network design - it has 10x Gigabit ports including 2, 4 or 8 SFP ports. The iGigaSwitch is designed for DIN-Rail mounting and comes with redundant input for powering.

 

I/O interfaces
The integrated I/O interface of the iGigaSwitch 10xx series allow a fast, simple and low-cost integration of non-IP based devices directly e.g. different sensors, control-lers, buttons etc. The switches are offering extensive management functionalities with interactions, sending of messages as well as the activation of alarms.

 

Power over Ethernet (PoE/PoE+/PoE++)
Up to 8x connected Ethernet devices can be supplied with Power over Ethernet. Ac-cording to the latest IEEE 802.3at (PoE+) standard, up to 30 watts per port are availa-ble for each connected device, with total budget of 240 watts. The latest generation of the iGigaSwitch 1004 E+ SFP-4VI HW5 provides PoE++ according to IEEE 802.3bt, with 90W per port and a total budget of 540W per switch.

 

IEC 61850
Nexans iGigaSwitch family complies to IEC 61850 requirements (parts 6, 7-1, 7-2, 7-3, 7-4, 8-1, 9-1 and 9-2 Communication networks and systems for power utility auto-mation). This functionality is critical for Smart grid and allows to use standardized equipment to ensure correct and reliable communication of all networked devices of Smart grid infrastructure (including switches, PLCs, different controllers, sensors etc.) with each other and with central SCADA.

The compliance is tested and confirmed by KEMA/DNV-GL.

Diagnostic Interfaces

Digital Diagnostics Monitoring Interface: Yes
Twisted Pair cable diagnostic: Yes

General

Dimensions [W x H x D]: 95mm x 184mm x 125mm
IP Protection Class: IP30 (EN 60529)
Mounting: 35mm DIN-Rail Mounting according to EN 60715, (EN 50022) Different mounting positions of DIN-rail clip - vertical and horizontal switch mount

Material: Anodised/Varnished Aluminium
Colour: Black
Ambient Temperature: Operation: -40 ... 70°C, Storage: -40 ... 85°C
Relative Humidity: 20 - 90% (non-condensing)
Weight: 1800g
MTBF: > 500,000h

Power Supply

Input voltage for switch: 90 … 264V AC / 127 … 370V DC
Input voltage for PoE+: -
Power consumption (without PoE): 13W (standby) … 15W (typ.) ... 28W (fully connected)
Heat output: 52 BTU(IT)/h (typ.)
Connector: 1x 3-pin terminal blocks, screw-on type (up to 2.5 mm²) / (PE) (L/+) (N/-)

 

I/O Interfaces

I/O Interface Connector: 12-pin terminal block (screw-on type)
Number of Outputs: 2
Output Switching Current/Voltage: 3A / 30V AC and DC, 500mA / 125V AC and DC, 100mA / 300V AC and DC
Auxiliary Voltage Source: 24V DC max. 42mA
Number of Inputs: 2
Input Voltage Range: 12 ... 60V DC
Dry Contacts Support: Yes, via aux voltage

 

Switching Parameters

Switching Type: Store-and-Forward, self-learning
Switching Capacity: 50Gbps
Packet Forwarding Rate per Port: 2x 1.488Mpps
Max. Frame Size: 9,600 Bytes (Support of Jumbo frames)
Packet Buffer: 512 kBytes
Latency (RFC1242): 100 Mbps / 64 Byte (FIFO/LIFO) 9ìs / 3.9ìs 100 Mpbs / 1518 Byte (FIFO/LIFO) 125ìs / 4ìs 1000 Mbps / 64 Byte (FIFO/LIFO) 2.7ìs / 2.2ìs 1000 Mpbs / 1518 Byte (FIFO/LIFO) 15ìs / 2.5ìs
MAC-Address Table: 8,192 MAC-Addresses
VLANs: IEEE802.1q with up to 256 Groups
Quality of Service Layer 2:IEEE802.1p Class of Service (4 Queues per Port)
Quality of Service Layer 3: RFC2474/3168 DSCP (4 Queues per Port)
Bandwidth Limitation: Bitrate and Number of Packets
Energy Efficient Ethernet: IEEE802.3az
Flow Control: IEEE802.3x
Fabric Attach: Basic Fabric Attach Client Support

Management

Management: On-Board High-Performance Management
LEDs: Management, Port Status and Activity, Memory Card
Zero-Touch Configuration; Via NEXMAN Controller
IP-Address: IPv4, IPv6
DHCP-Client: DHCP, DHCPv6
DHCP Relay Agent: Yes
File Transfer: TFTP, SCP
Console Port_ V.24 with Nexans Console Cable
Web-Interface: HTTP, HTTPS
Command Line Interface: SSH, Telnet
Scripting: Yes
SNMP: SNMPv1, v2c, v3
Further Management Protocols: Syslog, LLDP, LLDP-MED, CDP
Time Synchronisation: SNTP
Port Statistics: Detailed per Port

Redundancy

Redundancy Protocols: STP, RSTP, MSTP, MRP
Link Aggregation: LACP

Security

Password Protection: Two Access Levels (R/W or R/O)
Authentication via Radius: CLI and LANactive Management
Authentication via TACACS+: CLI and LANactive Management
Access Control List (ACL): Layer 2 and Layer 3
ACL for Management Interface: Up to 16 Access Control Lists
Portsecurity via MAC-Address: Up to 3 predefined MAC-Addresses
Portsecurity via Radius: IEEE802.1x
DHCP Snooping: Yes
Loop and Broadcast Limiter: Yes
Firmware Update: Dual Firmware Image
Configuration-/Reset Button: Yes / Yes
Memory Card: Micro SD-Card, optionally with fixed MAC-Address

CE - Conformity

Electro Magnetic Capability Directive: 2014/30/EU
Low Voltage Directive: 2014/35/EU
RoHS 2: 2011/65/EU
Engineering Standards: EN 62368-1, EN 61000-6-2, EN 61000-6-4, EN 61000-3-2, EN 61000-3-3, EN 50581, IEC 61850-3, -6, -7-1, -7-2, -7-3, -7-4, -8-1, -9-1, -9-2

Ressources

Ressources

Documentation

Datasheet pdf — 451.2 kB

Contactez-nous

Sujets sur lesquels vous souhaitez obtenir plus d'informations :

* Champs obligatoires

Veuillez vérifier votre saisie et réessayer.

Une adresse mail ne peut contenir qu'un seul @

Protection des données personnelles

Vous avez le droit de vous opposer au traitement de vos données personnelles et/ou à leur utilisation à des fins de marketing direct ou à des fins commerciales.

Merci !

Merci de nous avoir contactés. Nous vous contacterons sous peu.

Erreur

Une erreur s'est produite. Veuillez réessayer.

Fermer

Contactez-nous

* Champs obligatoires

Veuillez vérifier votre saisie et réessayer.

Une adresse mail ne peut contenir qu'un seul @

Protection des données personnelles

Vous avez le droit de vous opposer au traitement de vos données personnelles et/ou à leur utilisation à des fins de marketing direct ou à des fins commerciales.

Merci !

Merci de nous avoir contactés. Nous vous contacterons sous peu.

Erreur

Une erreur s'est produite. Veuillez réessayer.

Fermer