- Marchés
- Produits
- Services
- News
- Outils et Ressources
- A propos de Nexans
- Recherche
- Contactez-nous
- Comparer
- Se connecter
FLAMEX® PANTO LEAD-FREE 26/45 kV
FLAMEX® PANTO LEAD-FREE 50²
Réf. Nexans 79470574
- Conditionnement: Longueur à la coupe (m)
- Section du conducteur: 50 mm²
- Section de l'écran: 16 mm²
- Diamètre sur semi-conducteur extérieur: 29,0 mm
- Diamètre extérieur minimal: 34,0 mm
- Diamètre extérieur maxi: 36,0 mm
- Masse approximative: 2100 kg/km
FLAMEX® PANTO LEAD-FREE 95²
Réf. Nexans 79470575
- Conditionnement: Longueur à la coupe (m)
- Section du conducteur: 95 mm²
- Section de l'écran: 16 mm²
- Diamètre sur semi-conducteur extérieur: 32,0 mm
- Diamètre extérieur minimal: 40,0 mm
- Diamètre extérieur maxi: 42,0 mm
- Masse approximative: 2500 kg/km
FLAMEX® PANTO LEAD-FREE 150²
Réf. Nexans 79470576
- Conditionnement: Longueur à la coupe (m)
- Section du conducteur: 150 mm²
- Section de l'écran: 16 mm²
- Diamètre sur semi-conducteur extérieur: 36,0 mm
- Diamètre extérieur minimal: 41,0 mm
- Diamètre extérieur maxi: 43,0 mm
- Masse approximative: 3200 kg/km
FLAMEX® PANTO LEAD-FREE 185²
Réf. Nexans 79477903
- Conditionnement: Longueur à la coupe (m)
- Section du conducteur: 185 mm²
- Section de l'écran: 25 mm²
- Diamètre sur semi-conducteur extérieur: 37,0 mm
- Diamètre extérieur minimal: 42,0 mm
- Diamètre extérieur maxi: 44,0 mm
- Masse approximative: 3600 kg/km
FLAMEX® PANTO LEAD-FREE 240²
Réf. Nexans 79470577
- Conditionnement: Longueur à la coupe (m)
- Section du conducteur: 240 mm²
- Section de l'écran: 25 mm²
- Diamètre sur semi-conducteur extérieur: 40,0 mm
- Diamètre extérieur minimal: 45,0 mm
- Diamètre extérieur maxi: 48,0 mm
- Masse approximative: 4300 kg/km
Description
Description
Normes
-
Normes internationalesEN 45545-2 (HL3); EN 50264-1; IEC 60502
For inside and outside use in railway vehicles. Installation in cable ducts or tubes.
Current-carrying capacity acc. to EN 50343. Satisfies performance requirements to acc. to EN 45545-2 - HL3.
Available on request: HV loop, completely pre-assembled flexible cables with plugs and sealing ends, electrically tested.
DESIGN
1. Conductor: Flexible stranded tinned copper, class 5 acc. to IEC 60228
2. Inner conductive layer: Conductive rubber
3. Insulation: Cross-linked compound type EI 110 acc. to EN 50264-1
4. Outer conductive layer: Conductive rubber (thermo-strip)
5. Screen: Conductive tape + Tinned single wires with separator
6. Outer sheath: Cross-linked compound type EM104 acc. to EN 50264-1. Oil, diesel, ozone and UV resistant. Colour: black
Example of cable marking: FLAMEX ... WW/YYYY
FIRE SAFETY STANDARDS
FLAMEX® HV Power cables are conform to EN 45545-2
BENDING RADIUS
Static use: ... x outer diameter
For installation and occasional movements: ... x outer diameter
GUIDE TO USE
Cabling rules are given in EN 50343
Caractéristiques
Caractéristiques
Caractéristiques de construction
Caractéristiques de construction
Caractéristiques électriques
Caractéristiques électriques
Caractéristiques d'utilisation
Caractéristiques d'utilisation
Nos sites web
Sélectionnez votre pays pour trouver nos produits et solutions
-
Afrique
- Afrique
- Côte d'Ivoire
- Ghana
- Maroc
- Zone Afrique du Nord
- Amériques
- Asie
- Europe
- Océanie